ipmiutil screenshots and sample output
IALARMS
# ipmiutil alarms
ipmiutil ver 2.13
alarms ver 2.13
-- BMC version 0.19, IPMI version 2.0
Alarm LEDs: critical = off major = off minor = off power = off
Alarm Relays: major = off minor = off
disk slot 0 LED: off
disk slot 1 LED: off
disk slot 2 LED: off
disk slot 3 LED: off
disk slot 4 LED: off
disk slot 5 LED: off
alarms, completed successfully
ICMD
# ipmiutil cmd 00 20 18 01
ipmiutil ver 2.21
icmd ver 2.21
This is a test tool to compose IPMI commands.
Do not use without knowledge of the IPMI specification.
-- BMC version 0.19, IPMI version 2.0
respData[len=15]: 20 01 00 19 02 9f 57 01 00 11 08 00 48 00 16
send_icmd ret = 0
icmd, completed successfully
ICONFIG
# ipmiutil config -s /tmp/iconfig.out
ipmiutil ver 2.21
bmcconfig ver 1.1
-- BMC version 0.19, IPMI version 2.0
### bmcconfig, GetPefEntry ...
### bmcconfig, GetLanEntry for channel 1 ...
### bmcconfig, GetSOL for channel 1 ...
### bmcconfig, GetSerEntry for channel 4 ...
bmcconfig, completed successfully
# cat /tmp/iconfig.out
PEFParam 6,01: 01 c0 01 01 10 ff ff 01 ff 01 95 0a 00 00 00 00 00 00 00 00 00
PEFParam 6,02: 02 c0 01 01 10 ff ff 02 ff 01 95 0a 00 00 00 00 00 00 00 00 00
PEFParam 6,03: 03 c0 01 01 08 ff ff 04 ff 01 95 0a 00 00 00 00 00 00 00 00 00
PEFParam 6,04: 04 c0 01 01 08 ff ff 05 05 6f 01 00 00 00 00 00 00 00 00 00 00
PEFParam 6,05: 05 c0 01 01 08 ff ff 08 ff 6f 06 00 00 00 00 00 00 00 00 00 00
PEFParam 6,06: 06 c0 01 01 10 ff ff 0c 08 6f 02 00 00 00 00 00 00 00 00 00 00
PEFParam 6,07: 07 c0 01 01 08 ff ff 0f 06 6f 01 00 00 00 00 00 00 00 00 00 00
PEFParam 6,08: 08 c0 01 01 10 ff ff 07 ff 6f 1c 00 00 00 00 00 00 00 00 00 00
PEFParam 6,09: 09 c0 01 01 02 ff ff 13 ff 6f 3e 03 00 00 00 00 00 00 00 00 00
PEFParam 6,10: 0a c0 01 01 01 ff ff 23 03 6f 0e 00 00 00 00 00 00 00 00 00 00
PEFParam 6,11: 0b c0 01 01 01 ff ff 12 ff 6f 02 00 00 00 00 00 00 00 00 00 00
PEFParam 6,12: 0c 80 01 01 10 ff ff 20 ff 6f ff 00 00 00 00 00 00 00 00 00 00
PEFParam 6,13: 0d 80 01 01 08 ff ff 09 ff 0b 02 00 00 00 00 00 00 00 00 00 00
PEFParam 6,14: 0e 80 01 01 04 ff ff 09 ff 0b 01 00 00 00 00 00 00 00 00 00 00
PEFParam 6,15: 0f 80 01 01 04 ff ff 01 ff 81 95 0a 00 00 00 00 00 00 00 00 00
PEFParam 6,16: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PEFParam 6,17: 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PEFParam 6,18: 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PEFParam 6,19: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PEFParam 6,20: 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PEFParam 1: 01
PEFParam 2: 2f
PEFParam 3: 3c
PEFParam 4: 3c
PEFParam 9,1: 01 18 11 00
PEFParam 9,2: 02 00 00 00
PEFParam 9,3: 03 00 00 00
PEFParam 9,4: 04 00 00 00
LanParam 0,0: 00
LanParam 1,0: 15
LanParam 2,0: 14 14 14 14 00
LanParam 3,0: 0a f3 2a eb
LanParam 4,0: 01
LanParam 5,0: 00 0e 0c c7 1b a2
LanParam 6,0: ff ff ff 00
LanParam 7,0: 40 40 10
LanParam 10,0: 01
LanParam 11,0: 04
LanParam 12,0: 0a f3 2a fb
LanParam 13,0: 00 d0 06 21 eb fc
LanParam 14,0: 00 00 00 00
LanParam 15,0: 00 00 00 00 00 00
LanParam 16,0: 70 75 62 6c 69 63 00 00 00 00 00 00 00 00 00 00 00 00
LanParam 17,0: 04
LanParam 18,1: 01 00 01 00 00
LanParam 18,2: 02 00 00 00 00
LanParam 18,3: 03 00 00 00 00
LanParam 18,4: 04 00 00 00 00
LanParam 19,1: 01 00 00 0a f3 2a d8 00 07 e9 06 15 30
LanParam 19,2: 02 00 00 00 00 00 00 00 00 00 00 00 00
LanParam 19,3: 03 00 00 00 00 00 00 00 00 00 00 00 00
LanParam 19,4: 04 00 00 00 00 00 00 00 00 00 00 00 00
LanParam 192,0: 00 00 00 00
LanParam 193,0: 00 00 00 00 00 00
LanParam 194,0: 00
ChannelAccess 1: 02 04
SOLParam 1,0: 01
SOLParam 2,0: 82
SOLParam 3,0: 04 32
SOLParam 4,0: 06 14
SOLParam 5,0: 0a
SOLParam 6,0: 00
SOLPayloadSupport 1: 00 15 00 00 00 00 00
SOLPayloadAccess 1,1: 02 00 00 00
SOLPayloadAccess 1,2: 02 00 00 00
SOLPayloadAccess 1,3: 00 00 00 00
UserAccess 1,1: 0f 02 01 14
UserName 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,2: 0f 02 01 14
UserName 2: 75 73 72 32 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,3: 0f 02 01 0f
UserName 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,4: 0f 02 01 0f
UserName 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SerialParam 0,0: 00
SerialParam 1,0: 15
SerialParam 2,0: 14 14 14 14 00
SerialParam 3,0: 87
SerialParam 4,0: 00
SerialParam 5,0: 00 00 ff ff ff
SerialParam 6,0: 03
SerialParam 7,0: 20 0a
SerialParam 8,0: 16 08
SerialParam 9,0: 3f 00
SerialParam 10,0: 01 41 54 45 31 51 30 56 31 58 34 26 44 32 26 43 31
SerialParam 11,0: 2b 2b 2b 00 00
SerialParam 12,0: 41 54 48 00 00 00 00 00
SerialParam 13,0: 41 54 44 00 00 00 00 00
SerialParam 14,0: 00
SerialParam 15,0: 70 75 62 6c 69 63 00 00 00 00 00 00 00 00 00 00 00 00
SerialParam 16,0: 08
SerialParam 17,1: 01 00 05 03 00
SerialParam 17,2: 02 00 05 03 00
SerialParam 17,3: 03 00 05 03 00
SerialParam 17,4: 04 00 05 03 00
SerialParam 18,0: 3c
SerialParam 19,1: 01 00 07
SerialParam 19,2: 02 00 07
SerialParam 19,3: 03 00 07
SerialParam 19,4: 04 00 07
SerialParam 29,0: 66 11
ChannelAccess 4: 2b 04
UserAccess 4,1: 0f 02 01 14
UserName 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,2: 0f 02 01 14
UserName 2: 75 73 72 32 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,3: 0f 02 01 0f
UserName 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,4: 0f 02 01 0f
UserName 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
IDISCOVER
# ipmiutil discover -a -b 10.243.42.255
ipmiutil ver 2.21
idiscover ver 1.3
Discovering IPMI Devices:
1: response from 10.243.42.141
2: response from 10.243.42.7
3: response from 10.243.42.14
4: response from 10.243.42.145
5: response from 10.243.42.172
6: response from 10.243.42.182
7: response from 10.243.42.185
8: response from 10.243.42.183
9: response from 10.243.42.184
10: response from 10.243.42.138
11: response from 10.243.42.181
12: response from 10.243.42.179
13: response from 10.243.42.139
14: response from 10.243.42.216
15: response from 10.243.42.210
16: response from 10.243.42.229
17: response from 10.243.42.150
18: response from 10.243.42.120
19: response from 10.243.42.246
20: response from 10.243.42.158
21: response from 10.243.42.168
22: response from 10.243.42.248
23: response from 10.243.42.242
24: response from 10.243.42.243
25: response from 10.243.42.223
26: response from 10.243.42.171
27: response from 10.243.42.174
28: response from 10.243.42.222
29: response from 10.243.42.226
30: response from 10.243.42.228
31: response from 10.243.42.110
32: response from 10.243.42.120
33: response from 10.243.42.128
34: response from 10.243.42.169
idiscover: 1 pings sent, 34 responses
IEVENTS
# ipmiutil events 18 00 02 02 00 00 00 20 00 04 09 01 6f 44 0f ff
ipmiutil ver 2.40
ievents version 2.40
RecId Date/Time_______ Source_ Evt_Type SensNum Evt_detail - Trig [Evt_data]
0018 12/31/69 19:00:02 BMC 09 Power Unit #01 AC Lost 6f [44 0f ff]
ievents, completed successfully
# ipmiutil events -p -s sensor-TIGW1U.out B3 E8 00 0E 0C C7 1B A0 11 08 12 7F 10 90 FF FF 20 20 00 20 02 15 01 41 0F FF
ipmiutil ver 2.40
ievents version 2.40
0023 SDR Comp 02 2b 20 a 09 snum 02 Power Redundancy
0008 11/01/07 10:13:20 BMC 09 Power Unit #02 Redundancy Lost 0b [41 0f ff]
ievents, completed successfully
IFRU
# ipmiutil fru
ipmiutil ver 2.21
fruconfig: version 2.21
-- BMC version 0.19, IPMI version 2.0
SDR[004c] FRU 20 00 0c 01 Baseboard FRU
SDR[004d] FRU 20 02 15 01 Power Dist FRU
Component FRU Size : 256
Product Manufacturer: DELTA
Product Name : AC-061 B
Product Part Number : D76441-003
Product Version : 00
Product Serial Num : DLD0719000969
Product Asset Tag :
Product FRU File ID :
SDR[004e] FRU 20 03 0a 01 Pwr Supply 1 FRU
Component FRU Size : 256
Product Manufacturer: DELTA
Product Name : DPS-450KBA
Product Part Number : D40117-007
Product Version : S6
Product Serial Num : DLD0721003047
Product Asset Tag :
Product FRU File ID :
SDR[004f] FRU 20 04 0a 02 Pwr Supply 2 FRU
Component FRU Size : 256
Product Manufacturer: DELTA
Product Name : DPS-450KBA
Product Part Number : D40117-003
Product Version : S2
Product Serial Num : DLC0630000244
Product Asset Tag :
Product FRU File ID :
SDR[0050] IPMB 20 00 07 01 Basbrd Mgmt Ctlr
Mainboard FRU Size : 256
Chassis Type : Rack-Mount Chassis
Chassis Part Number : TIGW1U
Chassis Serial Num :
Chassis OEM Field : TIGW1U
Board Mfg DateTime : Sun Jun 17 16:11:00 2007
Board Manufacturer : Intel
Board Product Name : S5000PHB
Board Serial Number : CFTW72400602
Board Part Number : D40552-601
Board FRU File ID : FRU Ver 0.05
Board OEM Field :
Product Manufacturer: Intel
Product Name : S5000PHB
Product Part Number : TMWA0201W
Product Version :
Product Serial Num : sernum4wd
Product Asset Tag : asset4wd
Product FRU File ID :
Product OEM Field :
System GUID : b1d84f76-1de2-11dc-b3e8-000e0cc71ba0
BIOS Version : S5000.86B.10.00.D414.081520081354
fruconfig, completed successfully
IGETEVENT
# ipmiutil getevt
ipmiutil ver 2.21
getevent ver 2.21
-- BMC version 0.19, IPMI version 2.0
event receiver sa = 20 lun = 00
bmc enables = 0f
Waiting 120 seconds for an event ...
got event, sensor_type = 01
event data: 3c 22 02 7b e6 bf 48 20 00 04 01 30 01 50 2e 33
223c 09/04/08 09:45:31 BMC 01 Temperature #30 Lo Noncrit thresh act=2e thr=33
Waiting 120 seconds for an event ...
got event, sensor_type = 01
event data: 64 22 02 7d e6 bf 48 20 00 04 01 30 81 50 2e 07
2264 09/04/08 09:45:33 BMC 01 Temperature #30 LoN thresh OK now act=2e thr=07
Waiting 120 seconds for an event ...
get_event timeout
getevent, completed successfully
IHEALTH
# ipmiutil health
ipmiutil ver 2.21
bmchealth ver 2.21
BMC version 0.19, IPMI version 2.0
BMC manufacturer = 000157 (Intel), product = 0811 (TIGW1U)
BIOS Version = S5000.86B.10.00.D414.081520081354
Chassis Status = 01 (on, restore_policy=stay_off)
Power State = 00 (S0: working)
Selftest status = 0055 (OK)
Channel 15 Auth Types:
Status = 00, OEM ID 000000 OEM Aux 00
bmchealth, completed successfully
ILAN
# ipmiutil lan
ipmiutil ver 2.21
pefconfig ver 2.21
-- BMC version 0.19, IPMI version 2.0
pefconfig, GetPefEntry ...
PEFilter(01): 01 Temperature Sensor event - enabled for alert
PEFilter(02): 02 Voltage Sensor event - enabled for alert
PEFilter(03): 04 Fan Failure event - enabled for alert
PEFilter(04): 05 Chassis Intrusion event - enabled for alert
PEFilter(05): 08 Power Supply Fault event - enabled for alert
PEFilter(06): 0c Memory ECC Error event - enabled for alert
PEFilter(07): 0f FRB Failure event - enabled for alert
PEFilter(08): 07 BIOS POST Error event - enabled for alert
PEFilter(09): 13 Fatal NMI event - enabled for alert
PEFilter(10): 23 Watchdog Timer Reset event - enabled for alert
PEFilter(11): 12 System Restart event - enabled for alert
PEFilter(12): 20 OS Critical Stop event - enabled for alert
PEFilter(13): 09 Power Redundancy Lost event - enabled for alert
PEFilter(14): 09 Power Unit OK event - enabled for alert
PEFilter(15): 01 Temperature OK event - enabled for alert
PEF Control: 01 : PEFenable
PEF Actions: 2f : Alert PwrDn Reset PwrCyc DiagInt
PEF Startup Delay: 3c : 60 sec
PEF Alert Startup Delay: 3c: 60 sec
PEF Alert Policy[1]: 01 18 11 00 : Chan[1] Dest[1] Enabled
PEF Alert Policy[2]: 02 00 00 00 : Disabled
PEF Alert Policy[3]: 03 00 00 00 : Disabled
PEF Alert Policy[4]: 04 00 00 00 : Disabled
pefconfig, GetLanEntry for channel 1 ...
Lan Param(0) Set in progress: 00
Lan Param(1) Auth type support: 15 : None MD5 Pswd
Lan Param(2) Auth type enables: 14 14 14 14 00
Lan Param(3) IP address: 10 243 42 235
Lan Param(4) IP addr src: 01 : Static
Lan Param(5) MAC addr: 00 0e 0c c7 1b a2
Lan Param(6) Subnet mask: 255 255 255 0
Lan Param(7) IPv4 header: 40 40 10
Lan Param(10) BMC grat ARP: 01 : Grat-ARP enabled
Lan Param(11) grat ARP interval: 04 : 2 sec
Lan Param(12) Def gateway IP: 10 243 42 251
Lan Param(13) Def gateway MAC: 00 d0 06 21 eb fc
Lan Param(14) Sec gateway IP: 0 0 0 0
Lan Param(15) Sec gateway MAC: 00 00 00 00 00 00
Lan Param(16) Community string: public
Lan Param(17) Num dest: 04
Lan Param(18) Dest type: 01 00 01 00 00
Lan Param(18) Dest type: 02 00 00 00 00
Lan Param(18) Dest type: 03 00 00 00 00
Lan Param(18) Dest type: 04 00 00 00 00
Lan Param(19) Dest address: 01 00 00 [10 243 42 216] 00 07 e9 06 15 30
Lan Param(19) Dest address: 02 00 00 [0 0 0 0] 00 00 00 00 00 00
Lan Param(19) Dest address: 03 00 00 [0 0 0 0] 00 00 00 00 00 00
Lan Param(19) Dest address: 04 00 00 [0 0 0 0] 00 00 00 00 00 00
Lan Param(192) DHCP Server IP: 0 0 0 0
Lan Param(193) DHCP MAC Address: 00 00 00 00 00 00
Lan Param(194) DHCP Enable: 00
Channel Access Mode(1=lan): 02 04 : Access = Always Avail, PEF Alerts Enabled
pefconfig, GetSOL for channel 1 ...
SOL Enable: 01 : enabled
SOL Auth: 82 : User
SOL Accum Interval: 04 32 : 20 msec
SOL Retry Interval: 06 14 : 200 msec
SOL nvol Baud Rate: 0a : 115.2k
SOL vol Baud Rate: 00 : nobaud
SOL Payload Support(1): 03 00 15 00 00 00 00 00
SOL Payload Access(1,1): 02 00 00 00 : enabled
SOL Payload Access(1,2): 02 00 00 00 : enabled
SOL Payload Access(1,3): 00 00 00 00 : disabled
SOL Payload Access(1,4): 00 00 00 00 : disabled
Get User Access(1): 0f 02 01 14 : IPMI, Admin ()
Get User Access(2): 0f 02 01 14 : IPMI, Admin (usr2)
Get User Access(3): 0f 02 01 0f : No access ()
Get User Access(4): 0f 02 01 0f : No access ()
pefconfig, completed successfully
IRESET
# ipmiutil reset -n
ipmiutil ver 2.21
hwreset ver 2.21
-- BMC version 0.19, IPMI version 2.0
Power State = 00 (S0: working)
hwreset: sending NMI ...
chassis_reset ok
hwreset: IPMI_Reset ok
hwreset, completed successfully
ISEL
# ipmiutil sel
ipmiutil ver 2.21
showsel: version 2.21
-- BMC version 0.19, IPMI version 2.0
SEL Ver 51 Support f, Size = 3987 records, Free space = 3553 records
RecId Date/Time_______ Source_ Evt_Type SensNum Evt_detail - Trig [Evt_data]
0004 07/16/08 15:17:58 BMC 10 SEL Disabled #09 Log Cleared 6f [42 0f ff]
0018 07/16/08 15:23:08 BIOS 12 System Event #83 Boot: ClockSync_1 6f [05 00 ff]
002c 07/16/08 10:23:08 BIOS 12 System Event #83 Boot: ClockSync_2 6f [05 80 ff]
0040 07/16/08 10:24:37 0033 12 System Event #01 OEM System Booted 6f [01 ff 00]
0054 07/16/08 10:24:49 BMC 22 ACPI Power State #82 S0/G0 Working 6f [40 0f ff]
0068 07/16/08 11:12:55 BMC 08 Power Supply #70 Removed ef [40 0f ff]
007c 07/16/08 11:12:55 BMC 09 Power Unit #02 Redundancy Lost 0b [41 0f ff]
0090 07/16/08 11:12:55 BMC 09 Power Unit #02 Not Redundant 0b [43 0f ff]
00a4 07/16/08 11:13:23 BMC 08 Power Supply #70 Inserted 6f [40 0f ff]
00b8 07/16/08 11:13:23 BMC 09 Power Unit #02 Redundancy OK 0b [40 0f ff]
00cc 07/16/08 11:31:30 BMC 08 Power Supply #70 Removed ef [40 0f ff]
00e0 07/16/08 11:31:31 BMC 09 Power Unit #02 Redundancy Lost 0b [41 0f ff]
00f4 07/16/08 11:31:31 BMC 09 Power Unit #02 Not Redundant 0b [43 0f ff]
0108 07/16/08 11:31:40 BMC 08 Power Supply #70 Inserted 6f [40 0f ff]
011c 07/16/08 11:31:41 BMC 09 Power Unit #02 Redundancy OK 0b [40 0f ff]
0130 07/16/08 11:46:34 BMC 01 Temperature #30 Lo Noncrit thresh act=2f thr=34
0144 07/16/08 11:46:34 BMC 01 Temperature #30 Lo Crit thresh act=2f thr=33
0158 07/16/08 11:46:36 BMC 01 Temperature #30 LoN thresh OK now act=2f thr=07
016c 07/16/08 11:46:36 BMC 01 Temperature #30 LoC thresh OK now act=2f thr=06
0180 07/16/08 12:00:59 BMC 08 Power Supply #70 Removed ef [40 0f ff]
0194 07/16/08 12:01:00 BMC 09 Power Unit #02 Redundancy Lost 0b [41 0f ff]
01a8 07/16/08 12:01:00 BMC 09 Power Unit #02 Not Redundant 0b [43 0f ff]
01bc 07/16/08 12:01:32 BMC 08 Power Supply #70 Inserted 6f [40 0f ff]
[...]
1a08 08/12/08 01:57:20 SMI 20 OS Critical Stop #64 panic(dop) 6f [a1 6f 70]
1a1c 08/12/08 01:58:08 BMC 2a Session Audit #0a Deactivated User 1 6f [a1 01 11]
1a30 08/12/08 01:58:18 BMC 2a Session Audit #0a Activated User 1 6f [a0 01 01]
[...]
219c 08/27/08 06:29:24 BIOS 12 System Event #83 Boot: ClockSync_1 6f [05 00 ff]
21b0 08/27/08 06:29:25 BIOS 12 System Event #83 Boot: ClockSync_2 6f [05 80 ff]
21c4 08/27/08 06:30:18 0033 12 System Event #01 OEM System Booted 6f [01 ff 00]
21d8 08/27/08 06:30:29 BMC 22 ACPI Power State #82 S0/G0 Working 6f [40 0f ff]
showsel, completed successfully
ISENSOR
# ipmiutil sensor
ipmiutil ver 2.21
sensor: version 2.21
-- BMC version 0.20, IPMI version 2.0
_ID_ SDR_Type_xx ET Own Typ S_Num Sens_Description Hex & Interp Reading
0001 SDR Full 01 01 20 a 02 snum 10 BB +1.2V Vtt = be OK 1.20 Volts
0002 SDR Full 01 01 20 a 02 snum 12 BB +1.5V AUX = bd OK 1.47 Volts
0003 SDR Full 01 01 20 a 02 snum 13 BB +1.5V = 75 OK 1.52 Volts
0004 SDR Full 01 01 20 a 02 snum 14 BB +1.8V = af OK 1.78 Volts
0005 SDR Full 01 01 20 a 02 snum 15 BB +3.3V = c1 OK 3.32 Volts
0006 SDR Full 01 01 20 a 02 snum 16 BB +3.3V STB = bf OK 3.29 Volts
0007 SDR Full 01 01 20 a 02 snum 17 BB +1.5V ESB = be OK 1.48 Volts
0008 SDR Full 01 01 20 a 02 snum 18 BB +5V = c3 OK 5.07 Volts
0009 SDR Full 01 01 20 a 02 snum 1a BB +12V AUX = c1 OK 11.97 Volts
000a SDR Full 01 01 20 a 02 snum 1b BB +0.9V = ba OK 0.89 Volts
000b SDR Full 01 01 20 a 01 snum 30 Baseboard Temp = 2d OK 45.00 degrees C
000c SDR Full 01 01 20 a 01 snum 32 Front Panel Temp = 1a OK 26.00 degrees C
000d SDR Full 01 01 20 a 01 snum 48 Mem Therm Margin = 00 Init 0.00 degrees C
000e SDR Full 01 01 20 m 04 snum 50 Fan 1A = 6f OK 7659.00 RPM
000f SDR Full 01 01 20 m 04 snum 51 Fan 1B = 6b OK 5457.00 RPM
0010 SDR Full 01 01 20 m 04 snum 52 Fan 2A = 69 OK 7245.00 RPM
0011 SDR Full 01 01 20 m 04 snum 53 Fan 2B = 6b OK 5457.00 RPM
0012 SDR Full 01 01 20 m 04 snum 54 Fan 3A = 6c OK 7452.00 RPM
0013 SDR Full 01 01 20 m 04 snum 55 Fan 3B = 6b OK 5457.00 RPM
0014 SDR Full 01 01 20 m 04 snum 56 Fan 4A = 6f OK 7659.00 RPM
0015 SDR Full 01 01 20 m 04 snum 57 Fan 4B = 69 OK 5355.00 RPM
0016 SDR Full 01 01 20 m 04 snum 58 Fan 5 = 63 OK 6534.00 RPM
0017 SDR Full 01 01 20 a 03 snum 78 PS1 AC Current = 05 OK 0.31 Amps
0018 SDR Full 01 01 20 a 03 snum 79 PS2 AC Current = 16 OK 1.39 Amps
0019 SDR Full 01 01 20 a 03 snum 7a PS1 +12V Current = 01 OK 0.50 Amps
001a SDR Full 01 01 20 a 03 snum 7b PS2 +12V Current = 12 OK 9.00 Amps
001b SDR Full 01 01 20 a 0b snum 7c PS1 +12V Power = 01 OK 4.00 Watts
001c SDR Full 01 01 20 a 0b snum 7d PS2 +12V Power = 1b OK 108.00 Watts
001d SDR Full 01 01 20 a 01 snum 99 P1 Therm Margin = c7 OK -57.00 degrees C
001e SDR Full 01 01 20 m 01 snum c0 P1 Therm Ctrl % = 00 OK 0.00 unspecified
001f SDR Full 01 01 20 a 02 snum d0 Proc 1 Vccp = b0 OK 1.09 Volts
0020 SDR Comp 02 6f 20 a 09 snum 01 Power Unit = 00 c0 00 00 Enabled
0021 SDR Comp 02 0b 20 a 09 snum 02 Power Redundancy = 00 c0 01 00 Redundant
0022 SDR Comp 02 6f 20 a 23 snum 03 BMC Watchdog = 00 c0 00 00 OK
0023 SDR Comp 02 6f 20 a 06 snum 04 Scrty Violation = 00 c0 00 00 OK
0024 SDR Comp 02 6f 20 a 13 snum 07 FP Interrupt = 00 c0 00 00 OK
0025 SDR Comp 02 6f 20 a 10 snum 09 Event Log Clear = 00 c0 00 00 OK
0026 SDR Comp 02 6f 20 a 2a snum 0a Session Audit = 00 c0 00 00 Activated
0027 SDR Comp 02 6f 20 a 12 snum 0b System Event = 00 c0 00 00 OK
0028 SDR Comp 02 6f 20 a 29 snum 1e BB Vbat = 00 c0 00 00 OK
0029 SDR Comp 02 6f 20 a 08 snum 70 PS1 Status = 00 c0 01 00 Present
002a SDR Comp 02 6f 20 a 08 snum 71 PS2 Status = 00 c0 01 00 Present
002b SDR Comp 02 6f 20 a 22 snum 82 ACPI State = 00 c0 01 00 Working
002c SDR Comp 02 6f 20 a 14 snum 84 Button = 00 c0 00 00 OK
002d SDR Comp 02 03 20 a f3 snum 85 SMI Timeout = 00 c0 01 00 Enabled
002e SDR Comp 02 03 20 a c0 snum 87 NMI State = 00 c0 01 00 Enabled
002f SDR Comp 02 03 20 a c0 snum 88 SMI State = 00 80 01 00 Enabled
0030 SDR Comp 02 6f 20 m 07 snum 90 Processor 1 Stat = 00 c0 80 00 ProcPresent
0031 SDR Comp 02 6f 20 a 13 snum a0 PCIe Link0 = 00 c0 00 00 OK
0032 SDR Comp 02 6f 20 a 13 snum a1 PCIe Link1 = 00 c0 00 00 OK
0033 SDR Comp 02 6f 20 a 13 snum a2 PCIe Link2 = 00 c0 00 00 OK
0034 SDR Comp 02 6f 20 a 13 snum a3 PCIe Link3 = 00 c0 00 00 OK
0035 SDR Comp 02 6f 20 a 13 snum a4 PCIe Link4 = 00 c0 00 00 OK
0036 SDR Comp 02 6f 20 a 13 snum a5 PCIe Link5 = 00 c0 00 00 OK
0037 SDR Comp 02 6f 20 a 13 snum a6 PCIe Link6 = 00 c0 00 00 OK
0038 SDR Comp 02 6f 20 a 13 snum a7 PCIe Link7 = 00 c0 00 00 OK
0039 SDR Comp 02 6f 20 a 13 snum a8 PCIe Link8 = 00 c0 00 00 OK
003a SDR Comp 02 6f 20 a 13 snum a9 PCIe Link9 = 00 c0 00 00 OK
003b SDR Comp 02 6f 20 a 13 snum aa PCIe Link10 = 00 c0 00 00 OK
003c SDR Comp 02 6f 20 a 13 snum ab PCIe Link11 = 00 c0 00 00 OK
003d SDR Comp 02 6f 20 a 13 snum ac PCIe Link12 = 00 c0 00 00 OK
003e SDR Comp 02 6f 20 a 13 snum ad PCIe Link13 = 00 c0 00 00 OK
003f SDR Comp 02 05 20 m 01 snum c8 CPU1 VRD Temp = 00 c0 00 00 OK*
0040 SDR Comp 02 05 20 a 02 snum d2 CPU1 Vcc OOR = 00 c0 00 00 OK
0041 SDR Comp 02 03 20 a 07 snum d8 CPU Popul Error = 00 c0 00 00 OK
0042 SDR Comp 02 6f 20 a 21 snum e0 DIMM 1A = 00 c0 04 00 Present
0043 SDR Comp 02 6f 20 a 21 snum e1 DIMM 2A = 00 e0 40 00 NotAvailable
0044 SDR Comp 02 6f 20 a 21 snum e2 DIMM 3A = 00 e0 40 00 NotAvailable
0045 SDR Comp 02 6f 20 a 21 snum e3 DIMM 1B = 00 c0 04 00 Present
0046 SDR Comp 02 6f 20 a 21 snum e4 DIMM 2B = 00 e0 40 00 NotAvailable
0047 SDR Comp 02 6f 20 a 21 snum e5 DIMM 3B = 00 e0 40 00 NotAvailable
0048 SDR Comp 02 6f 20 a 0c snum ec Mem A Error = 00 c0 00 00 OK
0049 SDR Comp 02 6f 20 a 0c snum ed Mem B Error = 00 c0 00 00 OK
004a SDR Comp 02 6f 20 a 25 snum f0 DIMM Spare Enb = 00 e0 40 00 NotAvailable
004b SDR Comp 02 0b 20 a 0c snum f1 DIMM Spare Redu = 00 e0 40 00 NotAvailable
004c SDR FRU 11 18 dev: 20 00 80 00 0c 01 Baseboard FRU
004d SDR FRU 11 19 dev: 20 02 80 00 15 01 Power Dist FRU
004e SDR FRU 11 1b dev: 20 03 80 00 0a 01 Pwr Supply 1 FRU
004f SDR FRU 11 1b dev: 20 04 80 00 0a 02 Pwr Supply 2 FRU
0050 SDR IPMB 12 1b dev: 20 00 bf 07 01 Basbrd Mgmt Ctlr
0051 SDR OEM c0 09 Intel: 02 02 00 01 70 71
0052 SDR OEM c0 05 Intel: 06 01
0053 SDR OEM c0 19 Intel: 0b 01 01 32 14 f0 0a a4 01 96 00 61 00 08 0a 64 00 05 00 00 00 00
0054 SDR OEM c0 19 Intel: 0b 02 01 32 14 f0 0a a4 01 ff ff ff ff 10 14 ff ff 06 00 00 00 00
0055 SDR OEM c0 19 Intel: 0b 01 02 32 14 f0 0a a4 01 96 00 61 00 08 0a 64 00 05 00 00 00 00
0056 SDR OEM c0 19 Intel: 0b 02 02 32 14 f0 0a a4 01 ff ff ff ff 10 14 ff ff 06 00 00 00 00
0057 SDR OEM c0 2c Intel: 0c 01 30 64 64 01 02 03 30 20 32 64 01 90 0d 00 2b 20 30 21 35 22 3a 23 3f 24 43 25 47 26 4c 27 51 28 56 29 5b 2a 60 2b 64
0058 SDR OEM c0 2c Intel: 0c 02 30 64 64 01 02 03 30 20 32 64 01 90 0d 00 2b 20 30 21 35 22 3a 23 3f 24 43 25 47 26 4c 27 51 28 56 29 5b 2a 60 2b 64
0059 SDR OEM c0 2c Intel: 0c 03 30 64 64 01 02 03 30 20 32 64 01 90 0d 00 2b 20 30 21 35 22 3a 23 3f 24 43 25 47 26 4c 27 51 28 56 29 5b 2a 60 2b 64
005a SDR OEM c0 15 Intel: 0c 01 30 64 64 01 02 03 00 20 99 64 02 90 01 06 00 11
005b SDR OEM c0 15 Intel: 0c 01 30 64 64 01 02 03 00 20 48 00 02 b8 01 02 00 00
005c SDR OEM c0 15 Intel: 0c 02 30 64 64 01 02 03 00 20 99 64 02 90 01 06 00 11
005d SDR OEM c0 15 Intel: 0c 03 30 64 64 01 02 03 00 20 30 64 02 90 01 02 3c 00
005e SDR OEM c0 0e Intel: 08 00 00 45 88 45 88 45 88 45 88
005f SDR OEM c0 16 Intel: 09 00 00 90 33 90 33 90 33 90 33 90 33 90 33 68 42 68 42
0060 SDR OEM c0 08 Intel: BMC_TAM0 60 01 03 01 20 nrec=4 cfg=01
0061 SDR OEM c0 31 Intel: BMC_TAM1 60 01 13 00 20 41 01 01 01 23 71 93 41 02 01 02 24 72 94 41 03 01 02 24 72 94 21 04 01 01 23 11 02 05 14 31 29 6f 01 13 23 21 09 0b 14 34
0062 SDR OEM c0 31 Intel: BMC_TAM2 60 01 23 00 20 71 07 6f 03 13 23 33 43 55 83 11 08 6f 14 21 09 6f 54 64 20 7c 01 72 94 20 7d 01 72 94 11 21 6f 03 53 23 6f 05 15 25 35 85
0063 SDR OEM c0 17 Intel: BMC_TAM3 60 01 33 00 c0 22 02 00 03 51 22 03 00 03 51 22 04 00 03 51
0064 SDR OEM c0 0e Intel: SDR File 18
0065 SDR OEM c0 11 Intel: SDR Package 18
SDR IPMI sensor: Power On Hours = 6923 hours
sensor, completed successfully
ISERIAL
# ipmiutil serial
ipmiutil ver 2.21
tmconfig ver 2.21
-- BMC version 0.19, IPMI version 2.0
Code 0 SEL Ver 81 Support 15
tmconfig: GetSerEntry for channel 4 ...
Serial Param(0) Set in progress: 00
Serial Param(1) Auth type support: 15 : None MD5 Pswd
Serial Param(2) Auth type enables: 14 14 14 14 00
Serial Param(3) Connection Mode: 87
Serial Param(4) Sess Inactiv Timeout: 00 : infinite
Serial Param(5) Channel Callback: 00 00 ff ff ff
Serial Param(6) Session Termination: 03
Serial Param(7) IPMI Msg Comm: 20 0a : no_flow, DTR, 115.2k
Serial Param(8) Mux Switch: 16 08
Serial Param(9) Modem Ring Time: 3f 00
Serial Param(10) Modem Init String: 01 ATE1Q0V1X4&D2&C1
Serial Param(11) Modem Escape Seq: +++
Serial Param(12) Modem Hangup Seq: ATH
Serial Param(13) Modem Dial Command: ATD
Serial Param(14) Page Blackout Interval: 00
Serial Param(15) Community String: public
Serial Param(16) Num of Alert Dest: 08
Serial Param(17) Destination Info: 01 00 05 03 00
Serial Param(17) Destination Info: 02 00 05 03 00
Serial Param(17) Destination Info: 03 00 05 03 00
Serial Param(17) Destination Info: 04 00 05 03 00
Serial Param(17) Destination Info: 05 00 05 03 00
Serial Param(17) Destination Info: 06 00 05 03 00
Serial Param(17) Destination Info: 07 00 05 03 00
Serial Param(17) Destination Info: 08 00 05 03 00
Serial Param(18) Call Retry Interval: 3c
Serial Param(19) Destination Comm Settings: 01 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 02 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 03 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 04 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 05 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 06 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 07 00 07 : no_flow, 8N1, 19.2k
Serial Param(19) Destination Comm Settings: 08 00 07 : no_flow, 8N1, 19.2k
Serial Param(20) Number Dial Strings: 06
Serial Param(21) Dest Dial String: 01 01
Serial Param(21) Dest Dial String: 02 01
Serial Param(21) Dest Dial String: 03 01
Serial Param(21) Dest Dial String: 04 01
Serial Param(21) Dest Dial String: 05 01
Serial Param(21) Dest Dial String: 06 01
Serial Param(22) Number Dest IP Addrs: 04
Serial Param(23) Dest IP Address: 01 0 0 0 0
Serial Param(23) Dest IP Address: 02 0 0 0 0
Serial Param(23) Dest IP Address: 03 0 0 0 0
Serial Param(23) Dest IP Address: 04 0 0 0 0
Serial Param(29) Terminal Mode Config: 66 11
Channel Access Mode(4=Ser): 2b 04 : Access = Shared, PEF Alerts Disabled
Get User Access (1): 0f 02 01 14 : IPMI, Admin ()
Get User Access (2): 0f 02 01 14 : IPMI, Admin (usr2)
Get User Access (3): 0f 02 01 0f : No access ()
Get User Access (4): 0f 02 01 0f : No access ()
Get Serial MUX Status: 04
Get Boot Options(3): 01 03 00
tmconfig, completed successfully
ISOL
Shows isol console Windows ANSI emulation for the server's BIOS setup screen.
# ipmiutil sol -a -N 10.243.42.154
ipmiutil ver 2.60
isol ver 2.60
Opening lan connection to node 192.168.1.154 ...
Connecting to node ac1-tigw1u-bmc 192.168.1.154
-- BMC version 0.26, IPMI version 2.0
Opening lanplus connection to node 192.168.1.154 ...
[SOL session is running, use '~.' to end, '~?' for help.]
Red Hat Enterprise Linux Server release 5.1 (Tikanga)
Kernel 2.6.18-53.el5 on an i686
ac1-tigw1u login:
Red Hat Enterprise Linux Server release 5.1 (Tikanga)
Kernel 2.6.18-53.el5 on an i686
ac1-tigw1u login: root
Password:
Last login: Wed Feb 24 17:32:16 from chapin1
[root@ac1-tigw1u ~]# ls
192.txt ofu
anaconda-ks.cfg ofunew
bin powertop
bootcnt SHB26_912018.zip
clrbios.sh shb27
Desktop SHB27_942018.zip
edac-utils-0.15.tar.bz2 shb28
eeupdate SHB28_962118.zip
eeupdate-linux.tar.gz shb35
f34 SHB35_962618.zip
flashbug.txt shb36
flash.tar.gz snmpsa-1.1-10_el5.i386.rpm
install.log snmptrapd.conf
install.log.syslog SOLconnect-Fast2.dm
ipmievt.sh SOLconnect-Fast.dm
isol SOLconnect-KCI.dm
kernel-2.6.18-164.el5.src.rpm sup28a
loopKill.bh sup35a
loops test
lsi testsnmp.sh
nictest.sh tklc
[root@ac1-tigw1u ~]# pwd
/root
[root@ac1-tigw1u ~]# echo success
success
[root@ac1-tigw1u ~]# exit
logout
isol exit via user input
isol completed successfully
IWDT
# ipmiutil wdt
ipmiutil ver 2.21
wdt ver 2.21
-- BMC version 0.19, IPMI version 2.0
wdt data: 01 01 00 00 00 00 00 00
Watchdog timer is stopped for use with BIOS FRB2. Logging
pretimeout is 0 seconds, pre-action is None
timeout is 0 seconds, counter is 0 seconds
action is Hard Reset
wdt, completed successfully
IPMI_PORT
# ipmi_port
ipmi_port ver 1.1
open_rmcp_port(623) succeeded, sleeping
HOME